Mastering the correct installation steps of screw conveyor can effectively reduce the manpower and material resources needed during installation, and ensure the safe and stable operation of screw conveyor after installation. The installation of screw conveyor mainly needs to pay attention to the installation of casing, suspension bearing, screw blade shaft and transmission device.
Installation of casing:
1. The center position deviation of screw conveyor shall not be greater than 5mm.
2. The levelness shall be 0.3mm/m, but the total length shall not be greater than 5mm.
3. The straightness of the casing is 5mm.
4. The center elevation deviation shall not be greater than 5mm.
5. All joints shall be tight without ash leakage.
Jiangmen spiral conveying tower http://www.jm-kc.com/
08-24
What problems should be paid attention to when using tubular screw conveyor
Tubular screw conveyor is a kind of conveyor. Compared with ordinary conveyor, they have bucket storage box, which can transport materials on specific lines. They can be transported in various ways.
08-24
Selection method of pulley diameter of belt conveyor
The belt conveyor is a kind of continuous conveying equipment, which takes the conveyor belt as the traction and bearing component, and carries out the material transportation through the movement o
08-24
Correct operation of mesh belt conveyor
Net belt conveyor is a kind of conveyor that uses chain to carry and pull, or metal mesh belt installed on the chain to carry materials. In addition, the mesh belt conveyor is often combined with ot
08-24
Matters needing attention when connecting mesh belt conveyor
Mesh belt conveyor has been widely used in various industries of transportation, it from the body to the conveyor belt and then to the conveyor accessories are all metal materials, so its ultra-high